项 目
Property |
试验方法
Test Method |
单 位
Unit |
IR2200 |
物理性质 Physical Properties |
密度
Density |
ISO1183 |
kg/m3 |
1.20 × 103 |
熔融指数
Melt Flow Rate
(300℃, 1.2kg) |
ISO1133 |
g/10 min |
12 |
吸水率
Water adsorpton |
ISO 62 |
% |
0.23 |
机械性质 Mechanical Properties |
抗张强度
Tensile stress at Yield |
ISO 527 |
Mpa |
65 |
断张强度
Tensile stress at break |
ISO 527 |
Mpa |
65 |
断张率
Nominal tensile strain at break |
ISO 527 |
% |
95 |
张力模数
Modulus of elasticity in tensile |
ISO 527 |
Mpa |
2000 |
弯曲强度
Flexural strength |
ISO 178 |
Mpa |
90 |
弯曲模数
Modulus of elasticity in flexure |
ISO 178 |
Mpa |
2300 |
Charpy衝击强度
Charpy impact strength(1eA) |
ISO 179 |
kJ/m2 |
80 |
I洛氏硬度
Rockwell Hardness |
ISO 2039-2 |
R, M-scale |
R120, M50 |
热学性质 Thermal Properties |
HDT 热变形温度
Heat deflection temperature under load
(18.6 kg/cm2) (1.8Mpa) |
ISO 75-1 |
℃ |
125 |
成型收缩率
Mold Shrinkage (MD) |
ASTM D 955 |
% |
0.5~0.7 |
线膨胀系数
Linear expansion factor (MD) |
ASTM D 696 |
cm/cm/℃ |
6.5 × 10-5 |
电气性质 Electrical Properties |
绝缘强度
Dielecttric strength (1.0 mmt) |
IEC60243-1 |
MV/m |
30 |
体积固有阻抗
Volume resistivity |
IEC60093 |
Ohm × m |
> 1016 |
比诱电率
Dielecttric constant (100 Hz) |
IEC60250 |
- |
2.91 |
比诱电率
Dielecttric strength (106 Hz) |
IEC60250 |
- |
2.85 |
诱电正接因子
Dielecttric dissipation factor (100 Hz) |
IEC60250 |
- |
6.6 × 10-4 |
诱电正接因子
Dielecttric dissipation factor (106 Hz) |
IEC60250 |
- |
9.2 × 10-3 |
耐电弧性
Arc resistance |
ASTM D 495 |
sec |
110 |
光学性质 Optical Properties |
折射率
Refractive index (nD25) |
ASTM D542 |
- |
1.585 |
透光率
Light transmittance |
ISO 13468-1 |
% |
85~89 |
燃烧性 Flammability |
燃烧性
Flammability |
UL-94 |
File No.
E238753 |
V-2 (0.36mm)
V-2 (1.5mm)
V-2 (2.9mm)
HB (3.0mm)
HB (6.0mm) |
